Last updated: 2026-11-09
Quick answer: Boxes per pallet = boxes per layer × number of layers, then check the weight. Boxes per layer comes from the best pattern of the carton’s footprint on the pallet deck. Layers come from the height limit minus the pallet’s own height, divided by the carton height. For example, a 400 × 300 × 250 mm carton fits 8 per layer on a Euro pallet (1200 × 800 mm) and 6 layers under a 1.8 m height limit: 48 cartons. On a 48 × 40 in pallet, a 16 × 12 × 10 in carton fits 10 per layer in a mixed pattern (a simple grid gives only 9) and 5 layers under 60 in: 50 cartons.
Let the engine build the pallet. ContainerMath stacks your cartons onto pallets, layer by layer, then loads the pallets into the container or trailer, with weight and height checked at both steps. Free to try, no card.
Lay the carton’s footprint on the pallet deck in both orientations and keep the better one.
Euro pallet, 400 × 300 mm carton:
Orientation B wins, and it fills the deck exactly (8 × 0.12 m² = 0.96 m²).
48 × 40 in pallet, 16 × 12 in carton:
Neither simple grid fills the deck, but a mixed pattern does: one row of 4 cartons turned one way (48 in across, 16 in deep) and two rows of 3 turned the other way (48 in across, 12 in deep each). That uses 16 + 12 + 12 = 40 in of depth and gives 10 per layer, which is the most possible, since 10 × 192 in² equals the 1,920 in² deck.
This is why a pallet calculator that only tries the two simple grids can leave a box per layer on the table. Over five layers that is five cartons per pallet, and across a truckload of 26 pallets it is 130 cartons.
Layers = (height limit − pallet height) ÷ carton height, rounded down. This is for a limit on the overall height, which is how carriers usually quote it. If the limit is a load height above the deck (as in ContainerMath’s pallet settings), skip the subtraction.
| Example | Working | Layers |
|---|---|---|
| Euro pallet (144 mm), 250 mm carton, 1.8 m limit | (1,800 − 144) ÷ 250 = 6.6 | 6 |
| 48 × 40 (5.5 in), 10 in carton, 60 in limit | (60 − 5.5) ÷ 10 = 5.45 | 5 |
Height limits come from the warehouse racking, the pallet network or the vehicle. Check them before you plan: European pallet networks commonly cap a full pallet at 1.8 m to 2.2 m (some services at 1.2 m), and 60 in is a common default in the US. If pallets will be double-stacked in a trailer, each pallet must be no taller than half the trailer’s inside height. See how many pallets fit on a truck.
Multiply the cartons per pallet by the carton weight, add the pallet itself (about 20 to 25 kg for a Euro pallet, 30 to 48 lb for a 48 × 40), and compare with:
If the weight binds first, the right answer is fewer layers, not more pallets on the truck.
| Pattern | What it is | When to use it |
|---|---|---|
| Column stack | Every layer identical, cartons directly above each other | Maximum compression strength, for heavy or fragile cartons |
| Interlocked (brick) | Alternate layers rotated so cartons bridge the seams below | Better stability for light cartons, at some cost in strength |
| Mixed / pinwheel | Some cartons turned in a layer to fill the deck | When neither simple grid fills the pallet |
Column stacking keeps the carton corners aligned, which is where corrugated boxes are strongest. Interlocking ties the load together but puts corners over the middle of the panels below, which reduces how much weight each box can carry. Wrap and corner boards help either way.
Cartons hanging over the pallet edge lose much of their stacking strength and get damaged by forklifts. Keep the load inside the deck. Underhang of a centimetre or two is safer, but a lot of it wastes space in the truck.
Once you know cartons per pallet, the next question is how many pallets the vehicle takes. See the guides for the Euro pallet, the GMA pallet, a 40ft container and a 53ft trailer. If you are shipping loose cartons instead, see how many boxes fit in a container.
Find the best number of cartons per layer for the pallet’s deck, divide the allowed load height by the carton height to get the layers, multiply the two, then check the total weight against the pallet’s rating and the vehicle’s payload.
It depends on the carton. A 400 × 300 mm footprint fits 8 per layer, and a 600 × 400 mm footprint fits 4. The number of layers depends on the carton height and the height limit.
For a 16 × 12 in carton, 10 per layer in a mixed pattern, or 9 in a simple grid. With 10 in tall cartons and a 60 in limit, that is 50 per pallet.
There is no single standard. Common limits are 1.8 m to 2.2 m in European networks (lower for some services) and 60 to 72 in in the US, set by racking, the carrier or the vehicle.
Column stack heavy or fragile cartons, because the corners carry the load. Interlock light, stable cartons for a tighter, more secure pallet, and use stretch wrap either way.
The industry standard for 3D container cargo packing and loading plans. Optimize layouts, maximize volume, and reduce shipping overhead.
Built by Backrock Studios