Last updated: 2026-11-09
Quick answer: A loading metre (LDM), called Lademeter in German, is 1 metre of trailer length across the full width of the load space, which is about 2.4 m on a standard European trailer. One LDM therefore stands for roughly 2.4 m² of floor. A standard 13.6 m trailer holds 13.6 LDM, a Euro pallet (1200 × 800 mm) takes 0.4 LDM, and an industrial pallet (1200 × 1000 mm) takes 0.5 LDM. So a 13.6 m trailer fills at 34 Euro pallets or 26 industrial pallets.
Skip the arithmetic. Enter your pallets and their sizes in ContainerMath and see the floor layout, the loading metres it uses and whether weight or space is the limit. Free to try, no card.
For a quick floor layout in a trailer, the free cargo load planner places the pallets for you.
Road freight in Europe is often priced by the space a shipment blocks rather than by its volume. The unit for that space is the loading metre: a one-metre slice of the trailer, across its whole width. Other cargo cannot sit beside your pallets in that slice, so you are charged for the length they occupy.
Most carriers work from a standard trailer width of about 2.4 m, so:
1 LDM = 1 m long × 2.4 m wide = 2.4 m² of floor
The usable width of the vehicle is not exactly 2.4 m everywhere (the curtainsider on our dimensions page is 2.48 m inside), but 2.4 m is the convention used to quote and invoice loading metres.
LDM = (floor area of the load in m²) ÷ 2.4
For a stack of identical pallets, the floor area counts only the bottom pallet of each stack:
LDM = (pallet length × pallet width × number of stacks) ÷ 2.4
Worked examples:
| Load | Calculation | LDM |
|---|---|---|
| 1 Euro pallet, 1.2 × 0.8 m | 0.96 ÷ 2.4 | 0.4 |
| 1 industrial pallet, 1.2 × 1.0 m | 1.20 ÷ 2.4 | 0.5 |
| 10 Euro pallets, single layer | 10 × 0.4 | 4.0 |
| 10 Euro pallets, stacked two high (5 stacks) | 5 × 0.4 | 2.0 |
| 20 industrial pallets | 20 × 0.5 | 10.0 |
The rules of thumb are not an approximation, they are what the pallets do on the floor. Two Euro pallets turned crosswise (1.2 m across the trailer each) fill 2.4 m of width and use 0.8 m of length, so each pallet uses 0.4 m. Two industrial pallets crosswise do the same in 1.0 m of length, which is 0.5 m each.
This also explains the full-trailer counts. A 13.6 m trailer is 17 rows of two crosswise Euro pallets: 34 pallets. For industrial pallets, 13.6 ÷ 1.0 gives 13 full rows of two, which is 26 pallets, and the remaining 0.6 m is too short for another row.
For the same results on other vehicles, see how many pallets fit on a truck.
| Vehicle | Approx. usable length | LDM | Euro pallets (floor) |
|---|---|---|---|
| Standard curtainsider / box trailer | 13.6 m | 13.6 | 34 |
| Mega trailer (about 3.0 m interior height) | 13.6 m | 13.6 | 34 |
| Rigid truck | 7 to 8 m | about 7 to 8 | 16 to 20 |
The floor count comes from the same packing engine the product uses. A mega trailer has the same floor as a standard one, so it carries the same number of pallets on the floor. Its extra height only helps if the cargo is stackable.
When freight is light, loading metres measure the space you block. When it is heavy, carriers need a way to charge for weight too, so many tariffs state a minimum chargeable weight per LDM. A figure of 1,850 kg per loading metre is common in German and wider European tariffs, but it is a commercial term, not a law, so read your carrier’s own conditions. The chargeable quantity is usually the higher of:
A 13.6 m trailer also has a legal payload of around 24 tonnes, which is close to 1.8 tonnes for every LDM, so a full trailer of heavy pallets is limited by weight as well as by metres. Our axle weight limits guide covers the road limits.
A standard European semi-trailer has 13.6 loading metres. Rigid trucks have around 7 to 8, depending on the body length.
A Euro pallet (1200 × 800 mm) takes 0.4 LDM. An industrial pallet (1200 × 1000 mm) takes 0.5 LDM. If the pallet can be stacked two high, the pair takes the same space as one.
Multiply the number of floor positions by 0.4 for Euro pallets or by 0.5 for industrial pallets. Count a stack of two as one floor position.
Rechnen Sie die Stellfläche in Quadratmetern und teilen Sie durch 2,4. Eine Europalette (1,2 × 0,8 m) braucht 0,4 Lademeter, eine Industriepalette (1,2 × 1,0 m) 0,5 Lademeter. Ein Standard-Auflieger hat 13,6 Lademeter.
Almost. A loading metre is a linear metre of the vehicle taken across its full width, so it always includes the space beside your goods that nothing else can use.
The industry standard for 3D container cargo packing and loading plans. Optimize layouts, maximize volume, and reduce shipping overhead.
Built by Backrock Studios