Last updated: 2026-11-09
Quick answer: A 26ft box truck has a cargo area of about 25 ft 11 in long (7.9 m) × 8 ft wide (2.44 m) × 8 ft high (2.44 m), which is about 1,660 cubic feet (47 m³). On the floor it takes 14 standard 48 × 40 in pallets, or 19 Euro pallets, and double that if the pallets are stackable and the load height allows. The payload is around 12,000 lb (about 5,500 kg) on the truck we model, and real trucks of this class range roughly 8,000 to 12,000 lb. At 700 kg a pallet, that payload stops you at roughly 7 pallets well before the floor is full.
Know before you load. Enter your pallets and boxes in ContainerMath and see the layout and the weight against the truck’s payload. Free to try, no card.
| Measurement | Imperial | Metric |
|---|---|---|
| Interior length | 25 ft 11 in | 7.90 m |
| Interior width | 8 ft 0 in | 2.44 m |
| Interior height | 8 ft 0 in | 2.44 m |
| Cargo volume | about 1,660 ft³ | about 47 m³ |
| Payload | about 12,100 lb | about 5,500 kg |
These are typical figures. Real trucks vary by manufacturer and body builder: the usable height shrinks with a roof rib or a liftgate that intrudes, the body may be a few inches shorter, and the payload depends on the chassis rating and on whether the truck needs a commercial driver’s licence. Check the data plate on the door jamb for your vehicle’s actual payload, and measure the body before you commit a tight load. You can see the same figures drawn in the 26ft box truck dimensions page.
These are floor maximums for a single layer from the ContainerMath packing engine, with each pallet turned to its best orientation:
| Pallet | Size | Floor | Double-stacked | Payload limit at 700 kg each |
|---|---|---|---|---|
| GMA / standard US | 48 × 40 in | 14 | 28 | 7 |
| Industrial | 1200 × 1000 mm | 14 | 28 | 7 |
| Euro | 1200 × 800 mm | 19 | 38 | 7 |
The geometry says 14 or 19. The weight says 7 once each pallet weighs 700 kg. If your pallets are 300 kg, the payload lets you fill the floor, and stacked pallets become useful. Double-stacking needs about 1.2 m of height per layer in this body, so it works for light, stackable cargo only.
For the same maths on other trucks and trailers, see how many pallets fit on a truck. The longer 53ft case is in how many pallets fit in a 53ft trailer.
| Truck | Interior length | Typical use |
|---|---|---|
| 24ft box truck | 7.3 m (24 ft) | Regional delivery, furniture, appliances |
| 26ft box truck | 7.9 m (25 ft 11 in) | Largest body usually driveable without a CDL when the GVWR stays at 26,000 lb or below |
| 53ft dry van | 16.15 m | Full truckload linehaul |
The practical difference between the 24ft and 26ft bodies is about 0.6 m of floor and one to two pallets, but both carry a similar payload, so the extra length helps light, bulky freight more than heavy freight.
About 25 ft 11 in long, 8 ft wide and 8 ft high (7.9 × 2.44 × 2.44 m), roughly 1,660 cubic feet.
14 standard 48 × 40 in pallets on the floor, or 19 Euro pallets. Stacked, up to 28 and 38. Weight limits the practical load to about 7 pallets of 700 kg.
Around 12,000 lb (about 5,500 kg) in the vehicle we model; real trucks range roughly 8,000 to 12,000 lb. Always check the door-jamb plate on the actual truck.
About 1,660 cubic feet (47 cubic metres).
Yes, by about 0.6 m (2 ft) of length. It is the longest body of the common rental sizes.
The industry standard for 3D container cargo packing and loading plans. Optimize layouts, maximize volume, and reduce shipping overhead.
Built by Backrock Studios