Launch offer30% off Starter for 3 months — first 100 subscribers — plus 10% off any annual plan. Ends September 15, 2026.30% off Starter · 10% off annual · ends September 15, 2026Get the codes →

How many Standard pallets fit in a 45ft High Cube?

24 Standard pallets (1,200 × 1,000 mm) fit in a 45ft High Cube in a single floor layer, turned to their best orientation — up to 48 if the load is under 1,349 mm tall and stackable.

Floor (one layer)
24
Best mixed orientation, pallets touching.
Double-stacked
48
Only if each loaded pallet is under 1349 mm.
Payload allows
39
At 700 kg per loaded pallet.
Binding limit
Space
The floor fills before the payload does.

Space runs out first

24 loaded pallets at 700 kg each is about 16,800 kg, inside the 27,700 kg payload — so space is the limit here. Above roughly 1,154 kg per pallet that flips, and weight becomes the constraint instead.

The floor layout

24 pallets on the 13.56 m × 2.35 m (44′6″ × 7′9″) interior floor, seen from above. Shaded pallets are turned 90° — that mix is what gets the count above a plain row-by-row fit.

123456789101112131415161718192021222324

The assumptions

  • Pallet Standard pallet (1200 × 1000 mm), deck 150 mm.
  • Interior 13.56 m × 2.35 m × 2.70 m, payload 27,700 kg (61,068 lb).
  • Loaded pallet assumed at 700 kg gross — the one figure that can't be derived from the vessel, so it is stated rather than buried.
  • Maximum floor fit with pallets turned to their best orientation — the same basis as the widely quoted 11-in-a-20ft and 25-in-a-40ft figures. It is a geometric maximum: it assumes pallets touch, so allow a pallet or two fewer where a crew needs handling clearance, and check the door opening for the last row.

Your pallets aren't all 700 kg

Put in your real dimensions and weights and the engine packs them into a 45ft High Cube — with the 3D layout, the weight distribution and an exportable loading plan.

Pack a 45ft High Cube

Related

ContainerMathContainerMath

The industry standard for 3D container cargo packing and loading plans. Optimize layouts, maximize volume, and reduce shipping overhead.

Built by Backrock Studios
3D Container Loading CalculatorCargo Stacking SoftwareSea Freight Packing OptimizerFreight Cube UtilizationContainer Load PlannerLogistics Stowing AlgorithmNesting & Bundling Calculator2D/3D Container Stowage PlanTruck & Trailer Cargo PackerPallet Load OptimizationLogistics Dispatch SoftwareBackrock Studios

© 2026 ContainerMath. All rights reserved. All calculations and packing manifests generated using industry-standard stowing logic.