How many Standard pallets fit in a 40ft High Cube?
22 Standard pallets (1,200 × 1,000 mm) fit in a 40ft High Cube in a single floor layer, turned to their best orientation — up to 44 if the load is under 1,349 mm tall and stackable.
Space runs out first
22 loaded pallets at 700 kg each is about 15,400 kg, inside the 26,500 kg payload — so space is the limit here. Above roughly 1,204 kg per pallet that flips, and weight becomes the constraint instead.
The floor layout
22 pallets on the 12.03 m × 2.35 m (39′6″ × 7′9″) interior floor, seen from above. Shaded pallets are turned 90° — that mix is what gets the count above a plain row-by-row fit.
The assumptions
- Pallet Standard pallet (1200 × 1000 mm), deck 150 mm.
- Interior 12.03 m × 2.35 m × 2.70 m, payload 26,500 kg (58,422 lb).
- Loaded pallet assumed at 700 kg gross — the one figure that can't be derived from the vessel, so it is stated rather than buried.
- Maximum floor fit with pallets turned to their best orientation — the same basis as the widely quoted 11-in-a-20ft and 25-in-a-40ft figures. It is a geometric maximum: it assumes pallets touch, so allow a pallet or two fewer where a crew needs handling clearance, and check the door opening for the last row.
Your pallets aren't all 700 kg
Put in your real dimensions and weights and the engine packs them into a 40ft High Cube — with the 3D layout, the weight distribution and an exportable loading plan.
Pack a 40ft High CubeRelated
- 40ft High Cube dimensions, capacity and payload
- The full guide to pallet counts in standard containers and trailers
- How many Euro pallets fit in a 40ft High Cube?
- How many Euro pallets fit in a 45ft High Cube?
- How many Euro pallets fit in a 40ft Reefer?
- How many Euro pallets fit on a 48ft Dry Van Trailer?
- How many Standard pallets fit in a 45ft High Cube?
- How many Standard pallets fit in a 40ft Reefer?