Launch offer30% off Starter for 3 months — first 100 subscribers — plus 10% off any annual plan. Ends September 15, 2026.30% off Starter · 10% off annual · ends September 15, 2026Get the codes →
/ Road vehicle

Tata 407 (India) dimensions

A Tata 407 (India) measures 2.74 m (9′0″) long, 1.83 m (6′0″) wide and 1.83 m (6′0″) high inside — about 9.2 m³ (324 ft³) of usable space, with a payload up to 2,500 kg (5,512 lb).

Tata 407 light truck, the standard ~2.5 t city-distribution vehicle in India, hired for FMCG, appliances, ceramics and plywood. Body ~9×6×6 ft.

Internal dimensions and capacity

SpecificationMetricImperial
Internal length2.74 m9′0″ (9 ft)
Internal width1.83 m6′0″
Internal height1.83 m6′0″
Capacity9.2 m³324 ft³
Floor area5 m²54 ft²
Max payload2,500 kg5,512 lb
TEU equivalent0.28

Internal (usable) figures, not external. Capacity is the geometric interior volume — real cargo never fills 100% of it, because pallets, dunnage and irregular shapes leave void space.

Max payload is what the equipment itself is rated for. What you may legally load is often lower once the road leg's gross and per-axle limits apply — see container weight limits and max payload.

In Indian road-freight terms

Body length9 ft
ChassisSingle-axle (SXL)
Capacity324 CFT
Payload2.5 t (2,500 kg)
Crossover density7.7 kg/CFT

Cargo denser than 7.7 kg/CFT weighs this truck out before it fills the body; lighter cargo cubes out first. Compare it against the rest of the fleet on the Indian truck size and capacity chart.

How many pallets fit in a Tata 407 (India)?

PalletOn the floorDouble-stackedMax load height for 2 tiers
Euro pallet (1200 × 800 mm)480.91 m
Standard pallet (1200 × 1000 mm)240.91 m
US GMA pallet (48 × 40 in)240.91 m

Maximum floor fit with pallets turned to their best orientation — the same basis as the widely quoted 11-in-a-20ft and 25-in-a-40ft figures. It is a geometric maximum: it assumes pallets touch, so allow a pallet or two fewer where a crew needs handling clearance, and check the door opening for the last row.

Double-stacking is a condition, not a promise: two tiers only fit if each loaded pallet stays under the height in the last column. Weight usually bites first — at a mid-range 700 kg per loaded pallet, this vessel's 2,500 kg payload allows about 3 of them.

How much of this road vehicle will your cargo fill?

The table above is the box. What matters is how your cargo sits in it — how many units fit, where the weight lands, and whether you run out of floor or payload first. Enter your cargo and get the answer, free and without signing up.

Free CBM calculator See 3D load planning

Working out pallet counts? See how many pallets fit in a 40ft container and how many boxes fit in a container.

Other road vehicles

← All container and vehicle dimensions

ContainerMathContainerMath

The industry standard for 3D container cargo packing and loading plans. Optimize layouts, maximize volume, and reduce shipping overhead.

Built by Backrock Studios
3D Container Loading CalculatorCargo Stacking SoftwareSea Freight Packing OptimizerFreight Cube UtilizationContainer Load PlannerLogistics Stowing AlgorithmNesting & Bundling Calculator2D/3D Container Stowage PlanTruck & Trailer Cargo PackerPallet Load OptimizationLogistics Dispatch SoftwareBackrock Studios

© 2026 ContainerMath. All rights reserved. All calculations and packing manifests generated using industry-standard stowing logic.