/ Road vehicle

48ft Dry Van Trailer dimensions

A 48ft Dry Van Trailer measures 14.63 m (48′0″) long, 2.49 m (8′2″) wide and 2.69 m (8′10″) high inside — about 98 m³ (3,462 ft³) of usable space, with a payload up to 21,000 kg (46,297 lb).

48ft North American dry van semi-trailer. Same 8'2" × 8'10" interior as the 53ft, shorter deck. Rear door loading.

Internal dimensions and capacity

SpecificationMetricImperial
Internal length14.63 m48′0″ (48 ft)
Internal width2.49 m8′2″
Internal height2.69 m8′10″
Capacity98 m³3,462 ft³
Floor area36.4 m²392 ft²
Max payload21,000 kg46,297 lb

Internal (usable) figures, not external. Capacity is the geometric interior volume — real cargo never fills 100% of it, because pallets, dunnage and irregular shapes leave void space.

Max payload is what the equipment itself is rated for. What you may legally load is often lower once the road leg's gross and per-axle limits apply — see container weight limits and max payload.

How many pallets fit in a 48ft Dry Van Trailer?

PalletOn the floorDouble-stackedMax load height for 2 tiers
Euro pallet (1200 × 800 mm)36721.34 m
Standard pallet (1200 × 1000 mm)28561.34 m
US GMA pallet (48 × 40 in)28561.34 m

Maximum floor fit with pallets turned to their best orientation — the same basis as the widely quoted 11-in-a-20ft and 25-in-a-40ft figures. It is a geometric maximum: it assumes pallets touch, so allow a pallet or two fewer where a crew needs handling clearance, and check the door opening for the last row.

Double-stacking is a condition, not a promise: two tiers only fit if each loaded pallet stays under the height in the last column. Weight usually bites first — at a mid-range 700 kg per loaded pallet, this vessel's 21,000 kg payload allows about 30 of them.

The full answer per pallet type — the engine-solved floor layout and the payload check that decides whether space or weight runs out first:

How much of this road vehicle will your cargo fill?

The table above is the box. What matters is how your cargo sits in it — how many units fit, where the weight lands, and whether you run out of floor or payload first. Enter your cargo and get the answer, free and without signing up.

Free CBM calculator See 3D load planning

Working out pallet counts? See how many pallets fit in a 40ft container and how many boxes fit in a container.

Other road vehicles

← All container and vehicle dimensions

ContainerMathContainerMath

The industry standard for 3D container cargo packing and loading plans. Optimize layouts, maximize volume, and reduce shipping overhead.

Built by Backrock Studios
3D Container Loading CalculatorCargo Stacking SoftwareSea Freight Packing OptimizerFreight Cube UtilizationContainer Load PlannerLogistics Stowing AlgorithmNesting & Bundling Calculator2D/3D Container Stowage PlanTruck & Trailer Cargo PackerPallet Load OptimizationLogistics Dispatch SoftwareBackrock Studios

© 2026 ContainerMath. All rights reserved. All calculations and packing manifests generated using industry-standard stowing logic.